Assetto Corsa Fanatec Settings (Podium F1 DD2 – Clubsport)

Share on facebook
Share on twitter
Share on linkedin

Looking for the best and most realistic Fanatec wheel and FFB settings to race on Assetto Corsa?

As you may have guessed, having the proper and most realistic FFB settings is key for unlocking real lap time performance and consistency during the race.

We’ve gone through dozens of different settings and seemed to have found the sweet spot for the Fanatec Podium F1 DD1/2 and the Clubsport V2 & V2.5.

Each steering has got slightly different tuning adjustments and so let’s dive right in.

Fanatec Podium F1 DD1 & DD2 settings

Here’s the list of all of the settings from the Podium F1 steering wheel.

As you will see below, we’ve first listed the tuning settings that need to be changed from the Fanatec software dashboard, and then through the in-game AC settings you’ll want to adjust.

Tuning Menu Settings

  • SEN = 1080 (also shown as 108)
  • FF = 50
  • FFS = Peak
  • NDP = 15
  • NFR = 3
  • NIN = 5
  • INT = 2
  • FEI = 100
  • FOR = 100
  • SPR = 100
  • DPR = 100
  • BLI = Based on your preference (Default)
  • SHO = 100
  • BRF = Based on your preference (Default)

In-Game Settings

  • Invert = Unchecked
  • Gain = 50%
  • Filter = 0%
  • Min Force = 0%
  • Kerb Effects = 0%
  • Road Effects = 0%
  • Slip Effects = 0%
  • ABS Effects = 0%
  • Enhanced Understeer Effect = Unchecked
  • Half FFB Update Rate = Unchecked
  • Gamma = 1.00
  • Filter = 0.00
  • Speed Sensitivity = 0.00

Fanatec Clubsport V2 – V2.5 settings

Here’s the list of all of the settings from the Fanatec Clubsport V2 & V2.5.

Remember to first change the tuning settings from the Fanatec dashboard and then tweaking the settings from the in-game Assetto Corsa FFB menu.

Tuning Menu Settings

  • SEN = 900
  • FF = 100
  • SHO = 100
  • ABS = Based on your preference
  • DRI = -0.1
  • FOR = 100
  • SPR = 100
  • DPR = 50
  • BRF = Leave it to default
  • FEI = 100

In-Game Settings

  • Invert = Unchecked
  • Gain = 65%
  • Filter = 0%
  • Min Force = 0%
  • Kerb Effects = 0%
  • Road Effects = 0%
  • Slip Effects = 0%
  • ABS Effects = 0%
  • Enhanced Understeer Effect = Unchecked
  • Half FFB Update Rate = Unchecked
  • Gamma = 1.00
  • Filter = 0.00
  • Speed Sensitivity = 0.00

General Fanatec setting tips for Assetto Corsa

So as you can see in both the steering wheels we’ve recommended to set the speed sensitivity to 0 as well as the filter.

We’ve also included our most recommended in-game FFB settings as well as the tuning menu adjustments that need to be made for both the Podium F1 and the Fanatec Clubsport V2 & V2.5.

Once again you can see that the gain is different between the two racing wheels.

This is because the Podium F1 has a lot more force feedback output than the Fanatec Clubsport V2 & V2.5 and so will require only an in-game gain of 50% vs 65% for the Clubsport.

Conclusion

So here were our recommended settings for the Fanatec Podium F1 DD2 and Clubsport V2 & V2.5.

We hope that this will help you get the most out of your Assetto Corsa experience and help you unlock those last few tenths on your hot laps!

Good luck and we’ll see you on track! 🙂

Assetto Corsa – Related Articles

Fanatec FFB settings – Related Articles

error: Content is protected !!