fanatec csl dd

iRacing Fanatec Wheel & FFB Settings (Podium DD2 & CSL DD)

Looking for the most realistic and efficient Fanatec settings for iRacing?

As you can imagine, having the best wheel and FFB settings for your Podium F1 DD2 or CSL DD can make a huge difference in your driving experience and lap times.

Not only will you be able to be more precise with your steering inputs but you’ll also make way fewer mistakes when pushing the limits of the car.

The Fanatecs are some of the best steering wheels on the market but if you don’t spend the time to configure them properly you’ll be left frustrated, so that’s why we’ve made this guide for you.

Fanatec Tuning menu wheel settings

As you’ll see below, before heading to our iRacing Fanatec settings we will have to make sure that the software side of things is configured correctly.

iRacingFanatec wheel settings

In fact, through the Fanatec Tuning Menu, you can change a few different things that will affect how your wheel behaves in-game.

Just follow them from top to bottom and you’ll see that they are actually pretty simple to understand and configure.

Fanatec CSL DD iRacing settings

Let’s now have a look at all the tuning menu and in-game settings from the Fanatec CSL DD model.

fanatec csl dd

It’s one of the most popular one and that means that you’ll probably find a lot of people out there with the same steering wheel.

This has made it easier to compare our settings and find the ones that work for iRacing.

CSL DD Tuning Menu Settings

  • SEN = 1080 (Also shown as 108)
  • FF = 100
  • FFS = Peak
  • NDP = 15
  • NFR = Off
  • NIN = Off
  • INT = 6
  • FEI = 100
  • FOR = 100
  • SPR = 100
  • DPR = 100
  • BLI = Based on driver’s preference
  • SHO = 100
  • BRF = Based on driver’s preference

In-game CSL DD FFB settings

Steering

  • Wheel range = 900°
  • Wheel map = 900°

Brakes

  • Force factor = 0.0

Force Feedback

  • Enable Force Feedback = Checked
  • Use Linear Mode = Checked
  • Reduce Force When Parked = Checked
  • Strength = 4.5
  • Wheel Force = 15.0 Nm
  • Damping = 0%
  • Minimum Force = 0.0%

Podium F1 DD2 iRacing wheel settings

Let’s now have a look at all the tuning menu and in-game settings from the Fanatec Podium DD2 F1 wheel.

Fanatec Podium F1 DD2

The Podium F1 DD1 & DD2 offer some of the most advanced technology when it comes to sim racing.

They really make it feel like driving a real F1 car on track when all the settings are configured properly, so let’s have a look at them.

Podium Wheel DD2 Tuning Menu

  • SEN = 1080 (Also shown as 108)
  • FF = 90
  • FFS = Lin
  • NDP = 16
  • NFR = 2
  • NIN = 8
  • INT = 3
  • FEI = 100
  • FOR = 100
  • SPR = 100
  • DPR = 100
  • BLI = Based on driver’s preference
  • SHO = 100
  • BRF = Based on driver’s preference

Fanatec Podium DD2 iRacing FFB settings

Steering

  • Wheel range = 900°
  • Wheel map = 900°

Brakes

  • Force factor = 0.0

Force Feedback

  • Enable Force Feedback = Checked
  • Use Linear Mode = Checked
  • Reduce Force When Parked = Checked
  • Strength = 4.5
  • Wheel Force = 15.0 Nm
  • Damping = 0%
  • Minimum Force = 0.0%

Can you be fast in iRacing with a Fanatec?

Yes, of course you can since Fanatec is undoubtedly the most advanced racing wheel brand in the market.

However, it’s important to remember that a good tuning setup will always be the key to success both in terms of car handling and lap times.

So make sure you follow the steps outlined in this guide and you’ll be well on your way to becoming faster in iRacing.

Conclusion

So here were all the best Fanatec settings for iRacing that we could share with you.

Of course, these might not work for everyone out there since each one could have different FFB preferences, but they should be a good starting point.

Hope that helped, see you on track! 😉

iRacing – Related Articles

Fanatec FFB settings – Related Articles

error: Content is protected !!