Nascar Heat 5 Dover Xfinity Setup

Nascar Heat 5 Dover Xfinity Setup
Author Alessio Lorandi
Alessio Lorandi
March 29, 2022

Do you need to step outside inorder to locate recent setups in Nascar Heat 5 without any success?

Getting a suitable setup for NASCAR Xfinity is something we all understand and even more the case when driving in Dover.

Nascar Heat 5 Dover Xfinity Setup

 

If you wish to enter the low 23s then you should take advantage of a decent car setup so as to increase your chances of performance.

When setting the front right, you should set it to negative 2.5 while the front left should be set at positive 2.5.

Nascar Heat 5 Dover Xfinity – video onboard

With regard to the latter, the positive camber on the front left will assist you quite a bit in the initial turn-in phase, while the negative camber on the right will assist in mid-corner rotation where the most lateral load is exerted on the greater.

An excellent option that would be effective would be to have a fairly stiff swaybar of around 1.500° which would enable you to rotate the vehicle quite nice without also unduly disturbing the rear.

The important thing here is that the vehicle should not have a large amount of oversteer as this would lower your confidence making you unable to consistently push the limits more and more.

In terms of gearing, a 3.10 rear-end ratio and a 3 gears setup should be used.

NASCAR Heat 5 Xfinity Setups

What’s your Reaction?
wow
0
mind blowing
0
good
0
on fire
0
boring
0
sick of it
0

About the autor

Alessio Lorandi

Alessio has been involved at the highest levels in racing since the age of 5 (2003). He won a CIK-FIA World Championship in 2013 and then raced in F3, F2, and finally GT3s before now dedicating himself to SOLOX. He’s now on a mission to help thousands of sim racers around the world achieve their fullest potential through his ACC setups.

SOLOX

@SOLOXSetups

SOLOX

@SOLOXSetups

ACC GT3-GT4 SETUP SUBSCRIPTION

Shopping Cart
error: Content is protected !!