Nascar Heat 5 Kentucky Xfinity Setup

Share on facebook
Share on twitter
Share on linkedin

Have you been looking around for the latest and best setups in Nascar Heat 5 but struggled to find any good ones?

We all know how essential it is to have a great NASCAR Xfinity setup in NH5, especially in such a tricky circuit as Kentucky Speedway.

If you’re looking to crack into the low 31s then you’ll want to make sure you get yourself a great car setup to give you the best chance to succeed.

Nascar Heat 5 Kentucky Xfinity Setup

You’ll want to run a negative 3.0 camber in the front right while a positive 3.4 degrees in the front left.

That positive camber on the front left will help you a lot with the initial rotation phase, whereas the negative one on the right wheel will increase the mid-corner rolling phase where there’s the highest lateral force on the tires.

You’ll want a pretty stiff swaybar around 1.500° since it will help you turn the car nicely on entry, while at the same time not sliding the rear too much at the apex.

nascar kentucky layout

It’s really key to not have too much oversteer in the car as it would hurt your confidence and prevent you from pushing the limits deeper and deeper.

In terms of gearing, you’ll want to run a 3 gears setup with a rear-end ratio of 3.40.

Make sure you get yourself a nice draft as that can improve your lap time by even 3 to 4 tenths around Kentucky’s straights.

Nascar Heat 5 Kentucky Speedway Xfinity – video onboard

Here’s a brief video onboard around Kentucky with the Xfinity car from “The Setup Man” which will help you improve your driving and ideally your lap times.

Remember to lift off as little as possible in the corner so that you can maximize the exit speed and hold it down the long straights.

If you’re looking for a proven setup that was able to get into the low 31s you just have to go through the video where you can discover the setup he has run.

NASCAR Heat 5 Xfinity Setups

error: Content is protected !!