Nascar Heat 5 Mid Ohio Xfinity Setup

Nascar Heat 5 Mid Ohio Xfinity Setup

Have you been looking around for the latest and best setups in Nascar Heat 5 but struggled to find any good ones?

We all know how essential it is to have a great NASCAR Xfinity setup in NH5, especially in such a tricky circuit as Mid Ohio.

If you’re looking to crack into the mid 1.22s then you’ll want to make sure you get yourself a great car setup to give you the best chance to succeed.

Nascar Heat 5 Mid Ohio Xfinity Setup

You’ll want to run a negative 1.8° camber both on the right and the left as it will give you the best grip around the track.

You’ll want a pretty soft front swaybar around 1.435° since it will help you turn the car nicely on entry, while at the same time not losing the rear end at the apex.

It’s really key to not have too much understeer in this kind of circuit as it will just compromise your lap time, so try and find a good balance between front and rear grip.

In terms of gearing, you’ll want to run a 3 gears setup with a rear-end ratio of 3.60.

Nascar Heat 5 Mid Ohio Xfinity – video onboard

Here’s a brief video onboard around Mid Ohio with the Xfinity car from “The Setup Man” which will help you improve your driving and ideally your lap times.

This road circuit is very different from an oval as it will require you to properly brake into the corners and be smarter about racing lines.

Make sure you experiment with different setups in order to find what works best for you, and good luck at the races!

NASCAR Heat 5 Xfinity Setups

error: Content is protected !!